Описание

Amplifier Unit, Connector Type, PNP
Model GT2-71CP
Output PNP output
Mounting type DIN-rail mount
Main unit/Expansion unit Main unit
Power consumption Normal 2,200 mW max. (30 V, 73.3 mA max.)
Power saving (Eco) 1,700 mW max. (30 V, 56.7 mA max.)
Display power Measured value display 6 + 1/2-digit 7-segment LED (red)
Other displays 2-colour, 13-level bar LED display (red, green), indicators (red, green)
Display range -199.999.9 to 199.999.9
Display resolution 0.1 ?m
Sampling rate 1,000 times/sec.
Control input Timing/preset/ reset/bank input No-voltage input
Control output HH/HI/GO/LO/LL PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less*1*2
Analogue output -
Response time hsp (3 ms), 5 ms, 10 ms, 100 ms, 500 ms, 1 s
Environmental resistance Ambient temperature -10 to +50 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Materials Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight Approx. 70 g
*1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC, Control output current: 20 mA or less, (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC, Control output current: 10 mA or less (including the DL-RB1A output current), Residual voltage: 1.5 V or lower, (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C *2 The GT2-71MCN(P) does not have HH/LL.
''